National Postal Week commencing from 9th Oct 2011

India Post is celebrating the National Postal Week starting w.e.f. 9^th Oct 2011. Let us too celebrate it in every manner and bring more pride and honour to our Department.

9^th Oct 2011: World Postal Day

11^th Oct 2011: Savings Bank Day

12^th Oct 2011: Mail Day

13^th Oct 2011: Philatelic Day

14^th Oct 2011: Business Development Day

15^th Oct 2011: PLI Day

Every year 9th October World Postal Day is being celebrated.

As a member of Universal Postal Union, India Post is celebrating National Postal Week.

Patch for Removal of ceiling for maximum balance in SB accounts

Patch for Removal of ceiling for maximum balance in SB accounts, is now available in the SBLAN website. (SB Order No.20/2011) The order comes into effect from 1st October 2011. The downloaded file should be unzipped and executed from the DBAnalyzer folder. The patch can be run today itself.

Revised DBAnalyzer (Exe dated 28/09/2011) is also available in the
website.

Download Patch Download DBAnalyzer

Patch for Removal of ceiling for maximum balance in SB accounts

Patch for Removal of ceiling for maximum balance in SB accounts, is
now available in the SBLAN website. (SB Order No.20/2011) The order
comes into effect from 1st October 2011. The downloaded file should be
unzipped and executed from the DBAnalyzer folder. The patch can be run
today itself.


Revised DBAnalyzer (Exe dated 28/09/2011) is also available in the
website.


Download : Patch Download : DBAnalyzer




Source : http://www.tamilnadupost.nic.in/sdc/sblan.htm

Point Of Sale Pincode Updation Version2

The Requirement

Offices already using Point Of Sale are not able to update their PIN Code Database whenever a new version is released. In the process of upgradation it was not possible to upgrade the PIN Code database due to the size of the database. Hence the latest pincodes were not available for doing transactions in Point Of Sale. Having the latest PIN Codes in Point of Sale is very important, especially after the introduction of eMO. Those who have done upgradation can get the latest pincodes by using the PointOfSale Pincode Updation exe.

How to use

Run the setup.exe in the machine where Point Of Sale Server component is installed to install the application. After the installation, Point of sale Pincode Updation will be available under Start –>Programs. Run the Point of Sale Pincode Updation exe. Point Of Sale application should be closed in all the machines before doing this. Enter the path in which Point Of Sale Server component is installed and click on Update Pincode to update the pincodes.

Those who are using Point Of Sale Pincode Updation Version 1.0 can copy the pincode.txt file available under Upgrade folder to the application installation folder of Point Of Sale Pincode Updation. Then the Point Of Sale Pincode Updation.exe can be run to update the latest pincodes.

Future Updation

Whenever the Pincode details are updated a revised file will be kept in the ftp site (ftp.ptcinfo.org). The text file can be downloaded and it should be copied to the application installation folder of Point Of Sale Pincode Updation. Then the Point Of Sale Pincode Updation.exe can be run to update the latest pincodes.

Download

Guidelines regarding grant of ‘Vigilance Clearance’ to members of Central Civil Services / Posts

No.11012/11/2007-Estt.A

Government of India

Ministry of Personnel, PG & Pensions

Department of Personnel & Training

New Delhi dated 27^th September, 2011

OFFICE MEMORANDUM

Subject: Guidelines regarding grant of ‘Vigilance Clearance’ to members of Central Civil Services / Posts.

The undersigned is directed to say that it has been decided by the Government that officers who have not submitted the Annual Immovable Property Returns by the prescribed time would be denied vigilance clearance and Will not be considered for empanelment for senior level posts in Government of India.

2. Accordingly, in this Department’s OM No. 11012/11/2007-Estt.A dated 14.12.2007, laying down guidelines regarding grant of vigilance clearance to members of Central Civil Services / Posts, in para 2 a new sub-para (f) will be inserted as under:

(f) Vigilance clearance shall be denied to an officer if he fails to submit his annual immovable property return of the previous year by 31^stJanuary of the following year, as required under Government of India decisions under Rule 18 of the Central Civil Services (Conduct) Rule, 1964.

(U.S.Chattopadhyay)

Under Secretary to the Government of India

View Original Order

SOURCE : DOPT

LGO selected candidates need not wait for Induction Training!

They will be imparted a brief in house – Training of two weeks and posted as Postal Assistant

The Department has issued orders vide its letter No. 1-19/2010-Trg dt. 28.09.2011 that the PA/SA LGO candidates will be imparted two weeks in house training and posted as Postal Assistant. They need not wait for induction training and remaining as Postman/MTS after their selection in LGO examination.

Click here for view the order

Computer Trouble Shooting Tips

Computer Trouble Shooting Tips

01. There is no power light, and you cannot hear any cooling fan.
--> Check SMPS power, main power connection, and check connection on Motherboard from SMPS, check front panel connections.

02. There is no power light, but you hear the cooling fan running.
--> Check front panel connections.

03. The power light is on, but there is no apparent system activity.
-->Problem in Power good signal, video card, RAM slots.

04. The power light is on, but you hear two or more beeps.
--> CMOS checkup failure, RAM speed mismatch, RAM not inserted in its slot properly.

05. The power light is on, but the system hangs during initialization.
--> Check hardware settings, cables and bus.

06. You see no drive light activity.
--> Check power connection to that drive, front panel connections.

07. You see a message indicating ‘CMOS setup problem’.
--> Indicates CMOS memory has been failed so change CMOS battery.

08. The drive light remains on continuously.
--> Lens or head problem which indicates that Hard disk is in a bad condition.

09. You see normal system activity, but there is no video.
--> Check for monitor cable connection, monitor problem.

10. System fails to recognize the newly installed devices.
--> Check Power supply, cable connection, port, hardware. Enable settings in bios.

11. The system fails to boot, freezes during booting, or freezes during operation
for no apparent reasons.
-->problem in RAM, cache memory.

12. One or more applications fails to function as expected after an upgrade.
--> Check for hardware compatibility list for the newly installed software.

13. Windows 98/Me will not boot, and disk check reports bad clusters that it cannot repair.
--> Perform high level formatting, zerofill.

14. During the windows boot, you get an “Invalid system disk” error.
--> Operating system failure, invalid BOOT.INI file, bad MBR.

15. Windows 98/Me will not install on a compressed drive.
--> 98 doesn’t support NTFS to install OS.

16. BIOS ROM checksum error—system halted.
--> Restore BIOS settings, set the jumpers, and check the battery voltage and change it if necessary.

17. C: or D: drive error.
--> Check MBR, Try repartitioning, Adjust cable, Run disk check to remove bad sectors. If the error still persists, format.

18. "Cache memory bad, don’t enable cache" error
--> Change processor.

19. "CMOS battery failed" error
--> Change CMOS (complimentary metal oxide semiconductor) battery.

20. "CMOS checksum error-defaults loaded" error
--> Check jumpers.

21. CMOS memory size mismatch.
--> Change CMOS battery.

22. CPU at “nnn” error
--> Cache memory fails.

23. DMA (or DMA#1 or DMA#2) error.
--> North Bridge fail, disable DMA controller

24. Hard disk configuration error.
--> Setup BIOS as auto detect.

25. Hard disk failure.
--> Cable, auto detect, check for BIOS settings

26. Insert bootable media.
--> Check O.S on hard drive, change boot priority.

27. Keyboard controller failure.
--> Change keyboard.

28. Primary input device not found.
--> Keyboard not connected.

29. Disk cannot be read.
--> Mainly Motor problem or lens problem. Better check out all the devices in that Hard drive

30. The disk does not turn.
--> Spindle motor problem, so check its mechanism and replace if necessary.

31. The computer locks up while reading a CD/DVD.
--> CD/DVD problem, laser beam intensity problem and cable connection.

32. You receive a “Buffer Underrun” error when you are writing in CD-R mode.
--> Increase buffer size.

33. You receive an “invalid media” error when trying to boot from the CD.
--> That is not a bootable disk.

34. The system boots from the hard drive even though there is a bootable disk in the drive.
--> Check out setup BIOS and set first boot device to CD drive or floppy where you have inserted bootable disk.

35. When copying large files, the copy problem is eventually interrupted with a “blue screen” error.
--> RAM problem.

36. You see drive activity, but the computer will not boot from the hard drive.
--> Cable problem, bad sectors on tracks so try disk check and scandisk.

37. Your IDE drive spins up when power is applied, then rapidly spins down again.
--> Required wattage is not available from SMPS (Switch Mode Power Supply)

38. You see an “Error reading from C:” error message.
--> File system or file allocation table (FAT) error so better to format, OS not loaded properly so try to repair.

39. You see "Disk Boot Failure", "non-system disk", or "No ROM Basic- SYSTEM HALTED" error message.
--> General checkup, cable connections, bad sectors, insert bootable disk and change boot priority.

40. You find two keyboards listed in the Windows Device Manager.
--> When USB keyboard is connected it will show PS/2 also connected.

41. Your laptop doesn’t detect a PS/2 keyboard.
--> Change IRQ settings.

42. You are encountering a memory error with HIMEM.SYS under DOS.
--> Copy HIMEM.SYS from boot CD using command "extract" in base folder.

43. USB pointing device do not work in safe mode.
--> While in safe mode we will not get any other external devices

44. The modem will not pick up the phone line.
--> Busy, it’s already in use.

45. Secondary IDE controller resource conflict.
--> Set IRQ in auto.

46. You receive an "erase chip failure" when trying to run a flash loader.
--> Write protect change to "disable" in integrated peripheral

47. After installing new BIOS, the system now asks for a password.
--> Clear the CMOS by jumpers and try again

48. Power management features are not available.
--> Check in BIOS setup.

49. PnP support is not available, or PnP devices don’t function properly.
--> Your BIOS doesn’t support PnP feature

50. The A: drive appears in My Computer even though no drive is installed.
--> Change BIOS settings for floppy from enabled or disabled

General Information, IPC, Indian Constitution, Indian Evidence Act, CPC - Study material for IPO Exam

Published by : http://rmssa.blogspot.com/

Indian Penal Code ( IPC)

First law commission chaired by Lord Macaulay

Chapter Art,1833 under which the first Indian Law Commission was constituted

14th October,1837 the Draft Code submitted to the Governor General in Council

The Second Indian Law Commission was Constituted on 26th April 1845

Second Indian Law Commission on the Draft Penal Code submitted the Report in two part 1846 and 1847

Draft Code revised and presented to Governor General in Council in 1856

The code passed on 6th October,1860

Indian Constitution

The Constitution was enacted by the constituent assembly on 26th November 1949

It Came in to effect on 26 January 1950

The Indian Constitution replaced the Government of India Act 1935

The drafting committee was appointed On 29 August 1947

A Draft Constitution was prepared by the committee and submitted to the Assembly on 4 November 1947

Indian Evidence Act

The Indian Evidence Act, identified as Act no. 1 of 1872, and called the Indian Evidence Act, 1872,

The act was proposed by Sir James Fitzjames Stephan

The Act has eleven chapter and 167 sections

The Indian Evidence Act came into force on 1st September 1872

Criminal Procedure Code

The Criminal Procedure code came into force came into force on 1 April 1974

It was enacted in 1973

The Act consists of 484 sections, 2 schedules and 56 forms.

The Criminal Procedure Code extends to the whole of India except the states in India of J&K

The prevailing law on crime prevention and punishment is embodied in two principal statutes: the Indian Penal Code and the Code of Criminal Procedure of 1973.

Code of Criminal Procedure, 1973 repealing the old Code of 1898

The Code of Criminal Procedure (Amendment) Act, 2008

An Act further to amend the Code of Criminal Procedure, 1973

Collected by S Jayachandran , SA, Divisional Office , Mavelikara -690101- 9961464279 Visit http://nfpemavelikaradivision.blogspot.com

HSheet - for History Sheets

HSheet is an Access based tool to store records of Computers,Printers,Scanners,UPS,CDs etc and to obtain History Sheets based on the records.
Please test this and mail me your comments. Your suggestions to improve this is highly appreciated.

-Shivaram
srputtur@gmail.com
9449012470

http://doputtur.blogspot.com/

SpeedUP - A Tool For BNPL User

SpeedUP - Tool's Introduction

1. This tool is designed for BNPL Users

2. This tool will auto generate SPEED POST BARCODE and Receipt No.

3. First Double Click on ‘SpeedUP.exe’. It will open Tool like this.

4. Tool is divided in two parts.

5. You do not need to enter Date. Tool will automatically consider you system date as Entry Date.

6. In First part (primary part) enter First Receipt No. of BNPL User. ( i.e. if yesterday Last Receipt No. was 1401 then enter 1402 in First Receipt No. field)

7. In ‘Barcode Prefix’ enters the 2 Character of Barcode that you are pasting on article. (i.e. EG)

8. In ‘ 8 Digit after Barcode Prefix’ enter 8 Digit of First Barcode after Prefix that you are using today. (Purpose of this entry is to Auto Generate Barcode No. If today on Article you pasted a Barcode having no. ‘EG111774106IN’ then you have to enter ‘11177410’ in this field’. The remaining no. of Barcode Sheet will be auto generated by this Tool.)

9. Press ‘OK’ Button to Activate Secondary Data Entry Portion.

10. You will see the Receipt No. and Perfect Barcode No. is generated.

11. Enter Addressee Name, Addressee’s Address, Destination, Pincode, Reference.

12. Press ‘Save’ Button to save the entry.

13. You will see the next Receipt No. and Barcode will auto generated. As below.

14. After Completion of data entry click on ‘Export to Excel’ button to generate a file that can be uploaded in ‘SpeedNet Program’ Program.

15. After clicking on ‘Export to Excel’ in next screen a Window will open to save excel file.

· Save it in ROOT Directory i.e. c:\ or d:\ .

· Give name as ‘Sheet1.xls’.

· The Format of Excel must be ‘Excel 97-2003 Workbook’

16. After that you can take Report by clicking Report Button. Enter date in ‘dd/mm/yyyy’ format Enter your office name and then click on generate.

17. A report will be displayed. You can take print out from that window.

18. The most important thing is whenever your receipt no. or barcode no. series breaks then you have to exit from this tool and you must use Re-Export to notepad option to generate file.

(The purpose to exit from tool is that you can reinitialize you barcode series and receipt series)

19. The Excel File Generated From this Tool can be uploaded in Speednet Program. As below

CLICK HERE TO DOWNLOAD

CLICK HERE TO DOWNLOAD FULL PACKAGE


Configuration

----------------------------

1. Computer in which you are using this tool should compitible with Meghdoot Millennium Softwares.

2. Change Date format of Computer to 'dd/mm/yyyy'.

3. Install Printer and set Default Paper size to 'Gernam Standrad Fanfold'.

4. Whenever this Tool asked for date, enter in 'dd/mm/yyyy' format.

5. To install this tool, just copy 'Special Journal Tool' folder to any Local Hard Drive Location.

6. The Computer in which you are using this tool must have any version of ‘Microsoft Excel’

Developer

-------------

Vipul D. Vadher

System Administrator,

Gondal Head Post Office,

Gondal – 360311.

Mobile : +91 98793 22447

E-mail : sagondalho@gmail.com

Gujarati Blog : http://vdvadher.blogspot.com

English Blog : http://vadhervd.blogspot.com